NPA70DA Help Info
          

============================= System Information Command
?/HELP                        Print Help Information
STATUS                        Print System Status And Port Status
============================= System Control Command
PON                           Power On, System Run On Normal State
POFF                          Power Off, System Run On Power Save State
PWLED FOLLOW ON/OFF           ON:Set System Power Led Follow LCD Status
                              OFF:Set System Power Led Not Follow LCD Status,
                                  In Power On State,Power Led Always On
RESET                         Reset System Settings To Default
                              (Should Type "Yes" To Confirm, "No" To Discard)
RESET ALL                     Reset System and Network Settings To Default
                              (Should Type "Yes" To Confirm, "No" To Discard)
REBOOT                        Set System Reboot
AUTO STB xx                   Set System Auto Standby Time
                              xx=0:Auto Standby Off
                              xx=[1...120]:Auto Standby Time,(mins)
AMPMODE xxx                   Set Amp Power to xxx
                              xxx=2:PoE++ Type 4 Class 8 (71W)
                              xxx=3:PoE++ Type 4 Class 7 (62W)
                              xxx=4:PoE++ Type 3 Class 6 (51W)
                              xxx=5:PoE++ Type 3 Class 5 (40W)
                              xxx=6:PoE+ Type 2 Class 4 (25.5W)
KEY ON/OFF                    Set System KEY Control On Or Off
LCD ON/OFF/15/30/60           Set LCD Always On Or Auto Turn Off In 15/30/60s
IDLED ON/OFF/15/30/60         Set IDLED On Or Auto Turn Off In 15/30/60s
                              Power On State Or Turn On 15s/30s/60s
IR ON/OFF                     Set System IR Control On Or Off
TRIG ON/OFF                   Set Trigger On Or Off
RSB xx                        Set RS232 Baud Rate to xx bps
                              xx=[1...3]:1:4800,2:9600,3:19200
                              xx=[4...6]:4:38400,5:57600,6:115200
                              (Low level (0V) enable amplifier output,
                              High level (5-12V) disable amplifier out)
============================= Input Control Command
IN VOL yy                     Set Input Volume to yy
                              yy=[0...100]:Volume Value
IN VOL+                       Increase Input:xx Volume
IN VOL-                       Decrease Input:xx Volume
IN MUTE ON/OFF                Set Input:xx Mute On Or Off
============================= Output Control Command
OUT VOL yy                    Set Output Volume to yy
                              yy=[0...100]:Volume Value
OUT VOL+                      Increase Output Volume
OUT VOL-                      Decrease Output Volume
OUT MUTE ON/OFF               Set Output Mute On Or Off
OUT DLYT yy                   Set Output Delay Time to yy(ms)
                              yy=[1..50]:Delay Time, Minisecond
OUT REVB ON/OFF               Set Output Reverb On Or Off
OUT PHASE yy INV ON/OFF       Set Output L-Inverter Or R-Inverter On Or Off
                              yy=[0,1]0:LEFT,1:RIGHT
OUT MIX yy                    Set Output Mix yy
                              yy=[1,2]:1:STEREO,2:LEFT-CH
                              yy=[3,4]:3:RIGHT-CH,4:LEFT-CH and RIGHT-CH
OUT EQ yy VAL  zz             Set Output GEQ:yy to zz
                              yy=[1..31]:EQ Index
                              zz=[-10..3]:EQ Value
OUT EQ PRESET yy              Set Output GEQ to Preset:yy
                              yy=[1...3]:1:Flat,2:Custom1,3:Custom2
============================= Network Control Command
NET DHCP ON/OFF               Set Auto IP(DHCP) On Or Off
NET IP xxx.xxx.xxx.xxx        Set IP Address
NET GW xxx.xxx.xxx.xxx        Set Gateway Address
NET SM xxx.xxx.xxx.xxx        Set Subnet Mask Address
NET TCPPORT xxxx              Set TCP/IP Port
NET TN xxxx                   Set Telnet Port
NET RB                        Network Reboot and Apply New Config!!!
NET DNS xxxx                  Set DNS Domain Name To xxxx
================================================================