IP50HD-TX
1080p HD Video over IP Transmitter via 100Mbps Network
High Definition Video over IP Transmitter. Our Contractor HD Multicast distribution platform allows distribution of AV and control signals over a 100Mbps network.
The IP50HD-TX is an industry leading 1080p HDMI transmitter that, using H.265 compression technology, delivers HDMI, Bi-directional IR, RS-232 & USB/KVM up to lengths of 100m over standard network architecture.
The transmitter includes a HDMI loop-out for cascading to multiple devices and can be powered via PoE from the network switch or locally should the switch not support PoE. With multiple configuration options available the Multicast HD solution is ideal for both commercial and residential installations.
• Advanced HD video, control and KVM over network infrastructure
• Extends HDMI up to a distance of 100m over a single CAT cable
• Supports unicast transmission over unmanaged networks
• Supports multicast transmission for large managed networks
• Supports up to 1080p @ 60Hz
• Features 1 x HDMI loop-out for integrating local displays or cascading to multiple devices
• Supports PCM 2.0 channel audio only
• Advanced signal management for independent routing of IR, RS-232, USB/KVM, and video/audio
• PoE (Power over Ethernet) to power product from a PoE switch
• HDCP1.4 compliant with advanced EDID management
• Analogue L/R audio embedding and audio breakout (2ch PCM only)
• Local 12V 1A power supply should Ethernet switch not support PoE (supplied separately)
• Features 2 operational modes:
- Matrix distribution (requires 100Mbps network switch)
- One-to-one HDMI extender (no network switch required)
• Video input: 1 x HDMI Type A, 19-pin, female, locking
• Video output: 1 x LAN RJ45 connector, 1x HDMI Type A, 19-pin, female, locking
• Latency: 3 frames (<120ms subject to video compression, frame rate and scaling) No latency on HDMI Loop out
• Audio input: 1 x 3-pin Phoenix connector
• Audio output: 1 x 3-pin Phoenix connector
• Ethernet port: 1 x LAN RJ45 connector
• RS-232 serial port: 1 x 3-pin Phoenix connector
• USB/KVM Host Port: 1 x USB-Type B
• IR input: 1 x 3.5mm stereo jack
• IR output: 1 x 3.5mm mono jack
• PoE draw: 3.7W (typical), 4.0W (max load)
• Mounting kit included
• Dimensions (W x D x H): 190mm x 95mm x 25mm
• Dimensions Including Connections (W x D x H): 190mm x 100mm x 25mm, without feet
• Operating Temperature: 32°F to 104°F (0°C to 40°C)
• Storage Temperature: -4°F to 140°F (-20°C to 60°C)
1 x IP50HD-TX
1 x IR Receiver
1 x IR Emitter
1 x Mounting Kit
4 x Rubber Feet
Product Images
We have regional headquarters located in Melbourne, Australia, the UK and the USA. From all locations our experienced product managers are on hand to provide real time sales and technical support to our customers. Coupled with state of the art testing and training facilities this ensures our products can be installed in any AV environment with unrivalled confidence. We proudly deliver 24 hour technical support via phone, email and live chat to our sales partners throughout the world.
United Kingdom
Blustream UK
The Service Station,
Melton Road,
Hickling Pastures,
Nottinghamshire,
LE14 3QG, UK
+44(0) 115 8247000
European Union
Blustream SL
Calle Oro 45,
Nave 10,
28770,
Colmenar Viejo,
Madrid, Spain+34 911 232 072
USA
Blustream USA
5775 12th Avenue East,
Suite 180,
Shakopee,
MN 55379
+1 (952) 333-8411
Australia/Oceana
Blustream Australia
24 Lionel Road,
Mt. Waverley,
Victoria 3149,
Australia,
+61 3 8691 1999
Related Products
IP50HD-RX
1080p HD Video over IP Receiver via 100Mbps Network
IP200UHD-TX
UHD Video over IP Transmitter via 1Gb Managed Network
IP200UHD-RX
UHD Video over IP Receiver via 1Gb Managed Network
ACM210
Advanced Control Module for IP50, IP200 and IP300 Series Video over IP
Video